The MGA With An Attitude
MGAguru.com MGAguru.com
HORN MOUNTING - ET-109A

Windtone horn Windtone horn
Windtone horn Above left, horn mounting as original. Above right, with added protective tube on the wires.

At right, photo from top with body removed (ignore the cut-off round cross tube). Horn clears the original optional style sway bar.

Below left and right, with aftermarket anti-sway bar mounted underneath the front frame extension.
Windtone horn Windtone horn
When I installed my aftermarket sway bar below the frame, I turned the horns around to point forward so the horn bell end would not hammer on the sway bar.
horn bracket horn bracket
The brackets are right and left handed. The bend is not 90 degrees, but matches the angle on the front frame extension. Note also the coiled part of the horn belongs on the bottom so it will not retain water.
dual windtone horns installed

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2010-2019 Barney Gaylord -- Copyright and reprint information