On 5/16/2017, Mark Wellard in Australlia wrote:
"Pictures show the reproduction coupe supplementary door seal that I have made using a 3D printed mould. I found polyurethane rubber foam to be the best material to use. I will probably offer these to interested people later in the year".

These parts would be:
AFH4819 Sealing rubber - door hinge pillar (2 req'd)

The smaller rubber parts are available from other sources:
AFH4822 Sealing pad - "A" post - R/H
AFH4823 Sealing pad - "A" post - L/H