The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Seat Belts - LAP BELTS #3, Retrofit -- INT-121B
This idea comes from David Lake in Gold Coast, Queensland, AU

seat belt attachment, inboard Here is a photo of the tabs welded to the chassis. For the outboard attachment we ran a sleeved bolt through the chassis within a welded tube to stop the chassis compressing when we tightened the bolt. This is much easier done when the body is not on the chassis, but still possible.

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2011 Barney Gaylord -- Copyright and reprint information