The MGA With An Attitude
MGAguru.com MGAguru.com
SPOT WELD DRILL - TS-119

spot weld drill spot weld drill
Here's a nifty tool designed to remove spot welds without destroying the panel you want to keep. I like to call it a Spot Weld Mill, because the cutter bit looks more like a flat nose milling cutter with a tiny center pilot tip. Position this tool over a spot welded flange, align the cutter with the weld spot, and pull the trigger. As it starts to turn the cutter moves forward trapping the flange between cutter and anvil with some force so you do not have to push hard to drill. The two-finger cutter guard and the C-frame anvil can be adjusted to control the depth of cut so it will cut through one layer of metal and stop without cutting the second layer.


HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2008 Barney Gaylord -- Copyright and reprint information