The MGA With An Attitude
CONVERTIBLE TOP TECH -- TT-103-3 - (pg 3 of 30)
A close-up of the kit materials is shown below. By now the shiny bits
are familiar as Lift-the Dot fasteners and turnbutton eyelets. The 2 triangular
pieces with the spiral nails are end caps for the finishing strip. The narrow
finishing strip is just above that. The fabric piece under the hardware is
the header rail wrap, and here you can see the small flap of fabric that
will ultimately extend down over the top edge of the windscreen frame. Just
to the right of the end caps are a pair of what appear to be male snap fasteners
with wood screw or sheet metal threads. These were a bit of a mystery, and
will be revisited later near the end of this installation.
|