The MGA With An Attitude
MGAguru.com MGAguru.com
LIFT-THE-DOT TECH - TT-101-4 - (pg 4 of 13)

When installing lift-the-dot fasteners, all of the mating studs should be installed first, then you install the LTD part in a location on the fabric to match the location of the stud. Align the fabric where you want it, stretch it as tight as you want it to be with the final installation, and mark the location of the tip of the stud on the fabric.

Marking location for LTD fastener
Determining the location for the LTD fastener
HomeBackNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 1998 Barney Gaylord -- Copyright and reprint information