The MGA With An Attitude
MGAguru.com MGAguru.com
LIFT-THE-DOT TECH - TT-101-10 - (pg 11 of 13)

Install the turnbutton eyelet backing plate with the crowned side towards the fabric, same as with the LTD fasteners. Then just crimp the four legs of the eyelet down flat on the backing plate. I still like the channel locks. You may still like to protect the shiny bits.

Eylet backing plate and crimping
Crimping the eyelet backing plate
HomeBackNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 1998 Barney Gaylord -- Copyright and reprint information