The MGA With An Attitude
MGAguru.com MGAguru.com
INTAKE MANIFOLD for WEBER Carburetors - TC-301W

On 6/25/2016, Mick Anders wrote:
"Does anybody have a photo of how they fitted a generator or alternator to a Weber manifold that does not have a mounting hole for it"?

On 6/26/2016, Bill Sphon wrote:
" I stuck a stud in the front of the manifold to anchor the rear of the generator and then used a piece of square tubing, drilled at each end to go from there to the rear generator tab - would work the same for an alternator".
Stud on Weber manifold for generator or alternator mounting
Stud on Weber manifold for generator or alternator mounting

On 6/26/2016, Edward Vandyk wrote:
"You can fabricate a bracket and attach it to the block and use that as the rear mounting point".
Bracket for genertor rear mount on Twin Cam

HomeBacknext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2016 Barney Gaylord -- Copyright and reprint information