Chicagoland MG Club
General Tips
MGA Tips
MGB
Midget Tips
MGT Tips
MMM Tips
Tech Session Photo Archives
|
|
Easy change throttle shaft bushings, HIF carbs
Did you know that when rebuilding the later HIF4 carburetors, you can replace the throttle shaft bushings by driving them out with a 3/8" round bar stock available at many hardware stores for around $5.00 for a three foot length. Use the bar stock to drive out the old bushings. and then carefully replace them with new. I got this tip from Joe Curto, the SU carburetor repair shop located in NYC. I tried it and it works.
Credit this one to John DiFede March 30, 2001
Back to MGB Tech Tips
|
|