The MGA With An Attitude
SEAL For FRONT HUB - FS-131
Cross reference list for the oil seal for front wheel bearing hub, all MGA except Twin Cam and "Deluxe" cars. Also for MG TC, MG TD. MG TF, MG YB, MG ZA, MG ZB.
Seal Dimensions:
Inside Diameter: 2.125 in (53.98 mm) -- 2-1/8" shaft size
Outside Diameter: 2.838 in (72.09 mm) -- (special) housing bore
Width: 0.312 in ( 7.95 mm) -- 5/16" seal thickess
Original MGA part numbers:
BMC 130643
BMC/Leland ACF4004
Additional part numbers:
Moss Motors UK ACF4004
Moss Motors US 120-600
ROVER 88G555
ROVER ACF4004
ROVER GHS104
ROVER GHS211
ROVER RTC3504
Victoria British 5-858
Chrysler T3497
Manufacturers:
CR 550111
National 1035
Payen 78042
Payen C449
Payen NA293
Weston WR132
Here is another possibility. You might try a metric dimension shaft seal in size 54x72x8mm. The OD is almost 0.004-inch smaller, but with the rubber covered shell it may work.
Harwal 547208 ADL MBR (double lip Nitrile)
|