DT-101 - Why doesn't my TEMPERATURE GAUGE work?
DT-101A - TEMPERATURE SENSOR LINE Installation & Routing
DT-101B - TEMPERATURE SENSOR LINE Installation & Routing #2
DT-101C - TEMPERATURE SENSOR LINE Installation & Routing #3
DT-102 - Calibrating the TEMPERATURE GAUGE
DT-102A - REPAIR of the Analog TEMPERATURE GAUGE
www.ply33.com - os - REPAIR of the Analog TEMPERATURE GAUGE (o/s)
DT-102B - REPAIR of the Analog TEMPERATURE GAUGE 2
DT-102C - RUBBER GROMMET on the TEMPERATURE GAUGE
DT-102D - THREADS On The TEMPERATURE SENDER NUT
DT-102E - TEMPERATURE SENDER Nut And Bulb Flange Incorrect
DT-102F - REPAIR of the Analog TEMPERATURE GAUGE 3
DT-102G - REPAIR of the Analog TEMPERATURE GAUGE 4
DT-102H - ADAPTER for Aftermarket Temperature Gauge
DT-102I - ADAPTER for Aftermarket Temperature Gauge 2
DT-103 - Replacing DASH KNOBS
DT-103A - Restoring DASH KNOBS
  Restore Bakelite Dials, part 1 - YouTube video 6:44
  Restore Bakelite Dials, part 2 - YouTube video 10:33
DT-103B - Replacing a Control Cable CENTER WIRE
DT-103C - Replacing a Control Cable CENTER WIRE 2
DT-103D - Repairing Choke and Starter Cables
DT-104 - Bleeding the OIL PRESSURE GAUGE signal line
DT-104A - OIL PRESSURE GAUGE signal line HOSE STYLE
DT-104B - OIL PRESSURE GAUGE Port Fitting on Engine
DT-105 - SAFETY GAUGE Internal Mechanism
DT-106 - LOCATION OF INSTRUMENTS In The MGA Dash
DT-106A - LOCATION OF Turn Signal Dash Lamp in the MGA
DT-107 - Special BRACKET NUTS For Dash Instruments
DT-108 - REMOVING The SAFETY GAUGE
DT-109 - SWITCH KNOBS And BEZEL NUTS, MGA

DT-110 - Rebuilding the FABRIC COVERED DASH
DT-110A - Recovering the DASH With LEATHER
DT-110B - Recovering the Coupe Dash
DT-110C - Reinstalling the Dash BOTTOM TRIM STRIP
DT-111 - SPEAKER GRILLE or Blanking Plate for MGA Dash
DT-112 - The HORN BUTTON Switch for MGA
DT-113 - CHOKE CABLE LOCKING DEVICES
DT-115 - BRIGHT TRIM for Roadster Dash Panel
DT-116 - LIGHT BULB For Dash Illumination Lamps
DT-117 - LIGHT BULB For Dash Lamps, BRIGHTER
DT-120 - INSTRUMENT FACE STYLES
DT-125 - INSTRUMENT FACE RENEWAL
DT-125A - INSTRUMENT FACE RENEWAL #2
DT-130 - The TELLTALE TACHOMETER
DT-140 - Dash REMOVAL Sequence for MGA
DT-141 - Dash INSTALLATION Sequence for MGA
DT-142 - Dash Mounting Hardware for MGA
DT-143 - Dash BROKEN STUD Repair
DT-150 - Dash Instrument Case REFISHING

DT-200 - WOOD DASH PANEL Installation In The MGA
DT-200A - WOOD GRAIN STEEL DASH Panel
DT-200B - WOOD DASH PANEL With Reliefs
DT-200C - WOOD DASH PANEL With Chrome Trim
DT-201 - Changing To ELECTRIC TACHOMETER
DT-210 - Display Panel, 2 Instruments and Cubby
DT-215 - LIGHTING For Small Dash Instruments
DT-216 - LIGHTING SHIELD For Small Dash Instruments
DT-220 - Dash Light DIMMER Repair
DT-222 - LED BULBS for Instrument Lighting
DT-225 - LED STRIP for Instrument Lighting
DT-230 - GPS or Cell Phone MOUNTING in the MGA, #1
DT-231 - GPS or Cell Phone MOUNTING in the MGA, #2

ST-100 - STICKY SPEEDOMETER speed indicator needle
ST-101 - The INTERNAL MECHANICS of the SPEEDOMETER DRIVE
ST-101A - ODOMETER DRIVE Turns Per Mile Calculations
ST-102 - Methods of CALIBRATING THE ERROR of the speedometer
ST-103 - BROKEN ODOMETER DRIVE GEAR
ST-103A - STRIPPED ODO Drive Gear, REPAIR By Molding
ST-104 - Speedometer LOSS of DRIVE
ST-105 - NOISEY SPEEDOMETER or Tachometer
ST-106 - WAVING SPEEDOMETER Needle
ST-107 - Speedometer & Tachometer Cable DRIVE END DIMENSIONS
ST-107A - Speedometer & Tachometer Cable PART NO's & LENGTHS
  CF-140-30 - Speedometer & Tachometer Cable CHANGES (care)
ST-108 - Speedometer Cable ROUTING
ST-109 - Speedometer & Tachometer LUBRICATION
ST-110 - SPEEDOMETER MODELS for MGA
  SMOMG - SPEEDOMETER MODELS, Other MG not MGA (334-KB pdf)

ST-200 - DISASSEMBLING The SPEEDOMETER
ST-200A - DISASSEMBLING The SPEEDOMETER (#2)
ST-200S - REASSEMBLING A Small Tension Spring
ST-201 - SPEEDOMETER CALIBRATION, Variations and Adjustments
ST-202 - The MAGNETIC SPEEDOMETER DRIVE and more ways to calibrate
ST-203 - Changing the SPEEDOMETER GEAR RATIOS
ST-210 - o/s - REPAIRING Jaeger & Smiths SPEEDOMETERS - (1.3-MB pdf)
ST-211 - o/s - REPAIRING the NEMAG Speedometer Drive

TS-211 - Instrument NEEDLE PULLER (see Tools)

See Fuel Gauge notes in the Electrical section.