BD-100 - COLLISION REPAIR Estimator Guide for MGA
  MG-341 - Bezel Nut Spanner (csm)
BD-101 - BOOT LATCH STUCK
BD-101A - BOOT LATCH STUCK #2
BD-101B - BOOT LATCH STUCK #3
BD-101C - BOOT LATCH Support Bracket
BD-101D - BONNET LATCH STUCK
BD-101E - Bonnet Latch RETURN ASSIST SPRING
  MG-341 - Bonnet Lock/Release Lubrication (csm)
BD-101F - BONNET SAFETY CATCH STUCK
BD-101R - BOOT LATCH RECONNETED
BD-102 - Installing the MGA GRILLE, 1
BD-102A - Installing the MGA GRILLE, 2
BD-102B - Installing the MGA GRILLE, 3
BD-102C - GRILLE, ORIGINAL, MGA 1600-MK-II
BD-102D - GRILLE, PLASTIC SURROUND Reproduction
BD-102E - GRILLE, ORIGINAL, MGA 1500 Early
BD-102GB - GRILLE BADGE for MGA
BD-102GN - GRILLE NOSE PIECE for MGA
BD-102GT - GRILLE TAG for MGA

Thanks to Walter Tange for the picture.
BD-103A - DOOR ALIGNMENT Adjustment
BD-103B - DOOR HINGE Variations
BD-103B1 - DOOR HINGE PIN Repair #1
BD-103B2 - DOOR HINGE PIN Repair #2
  CF-140-20 - DOOR HINGE SHIMS, MGA Coupe (care)
BD-103C - DOOR LATCH Repair for the MGA
BD-103C1 - DOOR LATCH Repair Kit for the MGA
BD-103C2 - DOOR LATCH PIN Drawing for MGA
BD-103C3 - DOOR LATCH FIX for Faulty Replacement Part for MGA
  MG-219 - DOOR LOCK CABLE Attachment (csm)
BD-103D - DOOR ALIGNMENT During Reassembly
BD-103E - DOOR STRIKER Repair for the MGA
BD-103F - DOOR SHELL To BODY FLANGE Spacing
BD-103G - DOOR Bottom DRAIN HOLES
BD-103H - BODY Internal Brace PACKING
BD-103I - Dealing With A STUCK DOOR LATCH
BD-103J - DOOR BUFFERS

BD-104 - RUSTED SCREWS for Top Frame Attachment
BD-105 - BULKHEAD and HEATER SHELF Layout
BD-105G - BULKHEAD and HEATER SHELF Grommets
BD-106 - PLUMBING LAYOUT in the Engine Bay
BD-107 - BOOT FLOOR to REAR VALENCE Joint Seal
BD-107A - BOOT FLOOR to REAR VALENCE Joint Sealing #2
BD-107B - BOOT FLOOR, Early Production Welded Floor Pan
BD-107C - BOOT FLOOR, Late Production Drain Holes
BD-108 - SPLASH SEALS for Rear Fender
BD-108A - SPLASH PANELS Ahead of the Rear Wheels
BD-108B - Splash Seal SPLIT RIVETS
BD-109 - SEALING The BULKHEADS
BD-110 - SILL MOLDING Installation (Lower body trim strip)

BD-111 - WOOD SPACER for BONNET, Early
BD-111A - WOOD SPACER for BONNET, Late
BD-112 - WOOD SPACER for BOOT LID
BD-113 - WIPER ARMS & BLADES - Alternate Parts
BD-114 - PROP ROD SOCKET for Boot Lid
BD-115 - Installing FENDER PIPING
BD-115A - Installing FENDER PIPING #2
BD-115B - Installing FENDER PIPING #3
BD-115C - Installing FENDER PIPING #4
  PT-115 - PAINT OVER PIPING - Ahrrrruuuug ! - (See MG Painting Tech)
BD-116 - Installing the BOOT LID SEAL
BD-116A - BOOT LID SEAL MAGIC
BD-116B - BOOT LID SEAL Moss Motors #2
BD-117 - BOOT LID and BONNET ALIGNMENT
BD-118 - BOOT LID and BONNET QUICK CHANGE
BD-119 - BOOT LID and BONNET HINGES Orientation
BD-120 - BOOT LID and BONNET HINGE Captive Nuts
BD-121 - BONNET DESIGN CHANGE
BD-122 - FELT PADS For Spare Tire
BD-123 - EMBLEMS On The BOOT LID
BD-124 - BONNET SAFETY CATCH Drawing Errors
BD-125 - RETAINING PLATE for Pedal Excluder
BD-126 - PULL ROD, Front, for Boot Lock Release
BD-127 - COWL VENTS Change Of Style
BD-127A - COWL VENTS Broken Legs
BD-128 - RUBBER BUFFERS Locations for MGA Bonnet
BD-129 - REAR VALANCE and Bumper SHAPE
BD-130 - SHUT FACE PLATES, 1600-MK-II
BD-131 - FRONT VALANCE and Bumper SHAPE
BD-135 - SPARE TIRE CLAMP
BD-136 - SPARE TIRE CLAMP, Fabrication
BD-137 - SPARE TIRE CLAMP, Floor Bracket
BD-140 - TAIL LAMP LOCATION, 1500-1600
BD-141 - TAIL LAMP LOCATION, 1600-MK-II
BD-142 - TAIL LAMP Plinth Gaskets
BD-143 - HOLE LOCATIONS, Rear Valance
BD-150 - BOLTS in the Body Assembly
BD-151 - BODY REMOVAL or INSTALLATION As An Assembly
  RT-103A - BODY WEIGHT and BOLTS Securing Body to Frame (restoration)

BD-200 -os- Boot Lid and Bonnet PNEUMATIC LIFT
BD-201 - LOCKABLE BOOT for MGA
BD-202 - FRONT BODY SHROUD Alignment
BD-202A - FRONT BODY SHROUD Replacement
BD-203 - BONNET INSULATION
BD-205 - Bonnet LATCH PLATFORM Replacement
BD-206 - Bonnet SKIN REPAIR
BD-208 - GRILLE Screen Mesh Modificaton
BD-210 - TAPPING PLATE, Door Buffer, MGA
BD-211 - TAPPING PLATE (Captive Square Nut) for Shut-Face Panel
BD-214 - BRACKET, BODY SIDE MOUNT, FRONT, MGA
  Body Bracket, Front, Drawing (pfd)
BD-215 - BRACKET, BODY SIDE MOUNT, REAR, MGA
  Body Bracket, Right Rear, Drawing (2-page pfd)
BD-218 - FENDER (Front) CONVERSION from 1500 to 1600 (or vice versa)
BD-220 - PANEL, RADIATOR DUCT, MGA
BD-225 - SPLASH PANELS Behind Rear Wheels, MGA
  splash_rr.pdf - SPLASH PANEL TEMPLATES, Rear Wheel - (211-KB pdf)

BD-251 - Fiberglass Panels - HONEYBOURNE
BD-252 - Fiberglass Fenders, 2-ea Front and Rear
  RT-626 - Fiberglass Front Valance Panel Repair (see Restoration tech)
BD-261 - Windscreen POST SLOT in Front Fenders

BD-301 - VALANCE PANEL, Sebring Style 1
BD-302 - VALANCE PANEL, Sebring Style 2
BD-303 - VALANCE PANEL, Sebring Style 3
BD-310 - LOUVERED BONNET
BD-315 - FRONT COWL VENTS, Sebring Style
BD-320 - WHEEL WELL LINERS for the MGA

BP-100 - Fighting FOG LAMP BRACKETS
BP-100A - Fighting FOG LAMP BRACKETS, Cheating
BP-101 - Mounting a BADGE BAR
BP-102 - Mounting FOG LIGHTS and DRIVING LIGHTS
BP-103 - Mounting the FRONT BUMPER
BP-103A - ALUMINUM FRONT BUMPERS
BP-103B - REPRODUCTION BUMPERS
BP-103C - STAINLESS STEEL BUMPERS, Front and Rear
BP-104 - Mounting the REAR BUMPER
  MG-261 - Bumper Bar Protection (csm)
BP-105 - NUMBER PLATE MOUNTING, Rear
BP-106 - NUMBER PLATE MOUNTING, Front
BP-107 - RUBBER GROMMETS, Bumper To Body

Also see Restoration Tech